Robofun 機器人論壇

標題: the best and cheapest mciro servo [打印本頁]

作者: vela    時間: 2009-8-5 18:03
標題: the best and cheapest mciro servo
the best and cheapestmicro servo
so many good mciro servo for you to choose.
Believe you thoes micro servo can help you DIY best robot
作者: vela    時間: 2009-8-5 18:06
9g Metal Gear ServoPackage: One polybag one piece

Description: 0.12sec/60owith torque 1.3kg-cm(4.8V) wire: 18cm Metal Gear Servo

Feature:   Futaba, JR, Sanwa and Hitec compatible.

Important Notes:

1、  Specify the connector type when you purchase the servo.

2、  Refer to the figure when installing the servo accessories.

3、  For engine powered airplanes and boats, rubber must be used to reduce vibration.

4、  Please choose correct model for your application.

5、  Torque over-loaded will damage the servo's mechanism-.

6、  Keep the servo clean and away from dust, corrosive gas and humid air.
作者: vela    時間: 2009-8-5 18:08
16gStandard Analog Servo
Package: One polybag one piece



Description: 16.0g with torque1.3kg-cm (4.8V) 2.0kg-cm (6.0V); wire: 18cm Standard Servo.



Feature:   Futaba, JR, Sanwa and Hitec compatible.



Important Notes:

1、  Specify the connector type when you purchase the servo.

2、  Refer to the figure when installing the servo accessories.

3、  For engine powered airplanes and boats, rubber must be used to reduce vibration.

4、  Please choose correct model for your application.

5、  Torque over-loaded will damage the servo's mechanism-.

6、  Keep the servo clean and away from dust, corrosive gas and humid air.




歡迎光臨 Robofun 機器人論壇 (https://www.robofun.net/forum/) Powered by Discuz! X3.2