maxwill 發表於 2007-8-13 23:35:11

如何解決propeller的3.3V電壓與5V訊號問題

因為propeller的工作電壓是3.3V
當輸入5V訊號時,只需要再串聯一個1K~10K歐母的電阻就可以正常運作了

轉載並翻譯自 http://forums.parallax.com/forums/default.aspx?f=25&m=170044

[ 本帖最後由 maxwill 於 2007-8-25 21:54 編輯 ]
頁: [1]
查看完整版本: 如何解決propeller的3.3V電壓與5V訊號問題